Ankündigung

Einklappen
Keine Ankündigung bisher.

Instar 2905 v1 hängt in Reboot-Schleife, tot!

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

  • Problem Instar 2905 v1 hängt in Reboot-Schleife, tot!

    Hallo,

    meine Instar-2905v1-Kamera hängt in einer Reboot-Scheife und läuft nicht mehr an.
    Das "Wiederherstellen der Kamera nach einem fehlerhaften Firmware Update" habe ich auch durchgeführt, aber daran lag es nicht.
    Ist sonst irgendetwas defekt?

    SerienNr: 201103278
    Die Kamera müsste eine v1 sein, ich habe auch dafür die Daten aufgespielt.

    Hier das Logfile:

    W90P745 Boot Loader [ Version 1.1 $Revision: 1 $ ] Rebuilt on May 11 2010
    Memory Size is 0x1000000 Bytes, Flash Size is 0x400000 Bytes
    Board designed by Winbond
    Hardware support provided at Winbond
    Copyright (c) Winbond Limited 2001 - 2006. All rights reserved.
    Boot Loader Configuration:

    MAC Address : 00:EA:21:63:68:F2
    IP Address : 0.0.0.0
    DHCP Client : Enabled
    CACHE : Enabled
    BL buffer base : 0x00300000
    BL buffer size : 0x00100000
    Baud Rate : -1
    USB Interface : Disabled
    Serial Number : 0xFFFFFFFF


    For help on the available commands type 'h'

    Press ESC to enter debug mode ......
    Cache enabled!
    Processing image 1 ...
    Processing image 2 ...
    Processing image 3 ...
    Processing image 4 ...
    Processing image 5 ...
    Processing image 6 ...
    Processing image 7 ...
    Unzip image 7 ...
    Executing image 7 ...
    Linux version 2.4.20-uc0 (root@maverick-linux) (gcc version 3.0) #1013 Èý 12ÔÂ 2 13:17:32 CST 2009
    Processor: Winbond W90N745 revision 1
    Architecture: W90N745
    On node 0 totalpages: 4096
    zone(0): 0 pages.
    zone(1): 4096 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/rom0 rw
    Calibrating delay loop... 39.83 BogoMIPS
    Memory: 16MB = 16MB total
    Memory: 14376KB available (1435K code, 288K data, 40K init)
    Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
    Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    Winbond W90N745 Serial driver version 1.0 (2005-08-15) with no serial options enabled
    ttyS00 at 0xfff80000 (irq = 9) is a W90N745
    Winbond W90N7451 Serial driver version 1.0 (2005-08-15) with no serial options enabled
    ttyS00 at 0xfff80100 (irq = 10) is a W90N7451
    I2C Bus Driver has been installed successfully.
    Blkmem copyright 1998,1999 D. Jeff Dionne
    Blkmem copyright 1998 Kenneth Albanowski
    Blkmem 1 disk images:
    0: 7F0E0000-7F16BFFF [VIRTUAL 7F0E0000-7F16BFFF] (RO)
    S29GL032N Flash Detected
    01 eth0 initial ok!
    which:0
    PPP generic driver version 2.4.2
    Linux video capture interface: v1.00
    Winbond Audio Driver v1.0 Initialization successfully.
    usb.c: registered new driver hub
    add a static ohci host controller device
    : USB OHCI at membase 0xfff05000, IRQ 15
    hc_alloc_ohci
    usb-ohci.c: AMD756 erratum 4 workaround
    hc_reset
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb.c: registered new driver audio
    audio.c: v1.0.0:USB Audio Class driver
    usb.c: registered new driver serial
    usbserial.c: USB Serial Driver core v1.4

    _____ ____ _ ____
    |__ / _| _ \ / \ / ___|
    / / | | | | | |/ _ \ \___ \
    / /| |_| | |_| / ___ \ ___) |
    /____\__, |____/_/ \_\____/
    |___/
    ZD1211B - version 2.24.0.0
    usb.c: registered new driver zd1211b
    main_usb.c: VIA Networking Wireless LAN USB Driver 1.13
    usb.c: registered new driver vntwusb
    usb.c: registered new driver rt73
    dvm usb cam driver 0.0.0.0 by Maverick Gao in 2006-8-12
    usb.c: registered new driver dvm
    dvm usb cam driver 0.1 for sonix288 by Maverick Gao in 2009-4-20
    usb.c: registered new driver dvm usb cam driver for sonix288
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 1024 bind 2048)
    VFS: Mounted root (romfs filesystem) readonly.
    Freeing init memory: 40K
    BINFMT_FLAT: bad magic/rev (0x74202d74, need 0x4)
    BINFMT_FLAT: bad magic/rev (0x74202d74, need 0x4)
    Shell invoked to run file: /bin/init
    Command: mount -t proc none /proc
    Command: mount -t ramfs none /usr
    Command: mount -t ramfs none /swap
    Command: mount -t ramfs none /var/run
    Command: mount -t ramfs none /etc
    Command: mount -t ramfs none /flash
    Command: mount -t ramfs none /home
    Command: camera&
    [8]
    Command: sh

    Sash command shell (version 1.1.1)
    /> hub.c: connect-debounce failed, port 1 disabled
    new USB device :80fd7e04-fed640
    hub.c: new USB device 1, assigned address 2
    p1[7]:1,j 3,config->bNumInterfaces:4
    usbaudio: device 2 audiocontrol interface 2 has 1 input and 0 output AudioStreaming interfaces
    usbaudio: valid input sample rate 16000
    usbaudio: device 2 interface 3 altsetting 1: format 0x00000010 sratelo 16000 sratehi 16000 attributes 0x01
    usbaudio: valid input sample rate 48000
    usbaudio: device 2 interface 3 altsetting 2: format 0x00000010 sratelo 48000 sratehi 48000 attributes 0x01
    usbaudio: registered dsp 14,35
    usbaudio: warning: found 1 of 0 logical channels.
    usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine.
    usbaudio: registered mixer 14,32
    usb_audio_parsecontrol: usb_audio_state at 00ff35a0
    new USB device :80fb3004-fed640
    hub.c: new USB device 2, assigned address 3
    VIA Networking Wireless LAN USB Driver Ver. 1.13
    Copyright (c) 2004 VIA Networking Technologies, Inc.
    aw version is 0.25.2.6
    aw version is 29.5.3.13

    Wait for auto-negotiation complete...ResetPhyChip Failed
    MAC Line-on...

    Wait for auto-negotiation complete...open video device error
    MAC Line-off...
    myreboot

  • #2
    Zitat von AHERR2 Beitrag anzeigen
    Hier das Logfile:
    Wo hast du das log-file her, bzw wie hast du das aufgerufen?

    Gruss
    Michael

    Kommentar


    • #3
      Hallo,

      ich habe die Kamera geöffnet und mich mit einem "USB to serial UART Interface" an die serielle Schnittstelle gehängt.

      http://www.instar.de/faq_restore_firmware

      Gruss AHERR2

      Kommentar


      • #4
        Ich glaube kaum, dass dir hier ein user zielführende Hilfe geben kann.
        Das wäre eine Sache für den INSTAR-Support.
        Der ist aber erst ab dem 6.1.15 wieder erreichbar.

        Gruss
        Michael

        Kommentar

        Lädt...
        X